Eksplozija dokaz proti koroziji vse plastične fluorescenčne luči BYS-II

『Kliknite tukaj za prenos PDF dokumenta o izdelku: Eksplozijsko dokazano antikorozijsko vse plastične fluorescenčne luči BYS』

Tehnični parameter

Model in specifikacije	Znak za odpornost proti eksploziji	Vir svetlobe	Vrsta svetilke	Moč (W)	Svetlobni tok (Lm)	Color temperature (K)	Teža (kg)
BPY-□	Ex db eb IIC T6 Gb Ex tb IIIC T80°C Db	LED	I	1x9 1x18	582 1156	3000~5700	2.5
			II	2x9 2x18	1165 2312		6

Nazivna napetost/frekvenca	Vstopni navoj	Zunanji premer kabla	Emergency charging time	Emergency starting time	Emergency lighting time	Stopnja zaščite	Protikorozijski razred
220V/50Hz	G3/4	Φ10 ~ Φ14mm	24h	≤0.3s	≥90min	IP66	WF2

Lastnosti izdelka

1. The shell is made of high-strength molding. The transparent cover adopts polycarbonate injection molding with good light transmittance and strong impact resistance;

2. Labyrinth structure is adopted for the shell, which is characterized by good dust-proof, vodoodporen and strong corrosion resistance;

3. The built-in ballast is a special explosion-proof ballast with a power factor ≥ 0.95. The built-in disconnecting switch automatically cuts off the power supply when the product is opened to improve the safety performance of the product; It also has short circuit and open circuit protection functions. It is equipped with prevention circuits for the aging effect and air leakage of the lamp tubes, so that the lamps can work normally, with high efficiency and energy saving. It has wide voltage input range, constant power output and other characteristics;

4. Equipped with well-known brand fluorescent tubes, with long service life and high luminous efficiency;

5. Emergency devices can be configured according to user requirements. When the external power is cut off, the lamps will automatically switch to the emergency lighting state;

6. Steel pipe or cable wiring is acceptable.

Dimenzije za namestitev

Veljavno področje uporabe

1. Velja za kraje v coni 1 in coni 2 eksplozivni plinsko okolje;

2. Uporablja se za kraje v conah 21 in 22 vnetljiv prah okolje;

3. Primeren za eksplozivno plinsko okolje IIA, IIB in IIC;

4. Velja za T1~T6 temperatura skupine;

5. It is applicable to work and scene lighting in dangerous environments such as petroleum exploitation, oil refining, chemical industry and gas station;

6. It is applicable to places with high protection requirements, humidity and corrosive gases.