Spécifications d'installation

Specifies the technical requirements and conditions necessary for the installation of explosion-proof products.

L’installation de lumières antidéflagrantes est-elle nécessaire

2024-01-03 Spécifications d'installation

As mandated by the Fire Protection Law, locations susceptible to flammable gases or combustible dust are required to install explosion-proof lighting. Employing these safety-compliant fixtures is a measure that significantly enhances safety.

En savoir plus
Does the Wiring of Explosion-Proof Lights Have to Be Steel Pipes

2024-01-03 Spécifications d'installation

To ensure safety in explosive environments, it is imperative that installations utilize thick steel pipes. At every junction, proper pipe fittings are required to maintain integrity, while threaded joints should adhere to specific tooth count standards. Additionally, a steadfast connection between pipes must be established through a grounding wire to…

En savoir plus
How Much Square Wire Is Used for Explosion-Proof Lights

2024-01-02 Spécifications d'installation

A 200-watt explosion-proof light requires a 0.75mm² wire for connection, adhering strictly to national standards. Typiquement, to ascertain the necessary current for an explosion-proof light, you calculate by dividing its power by a standard voltage of 220V, thus determining the appropriate rated current. Consider this: a 1mm² copper core wire…

En savoir plus
What Wires Are Used for Explosion-Proof Lights

2024-01-02 Spécifications d'installation

Use explosion-proof cables, which can be intrinsically safe, flameproof, or run through steel conduits or explosion-proof flexible conduits. Please refer to GB50058-92.

En savoir plus
Does the Explosion-Proof Light Housing Need to Be Grounded

2024-01-02 Spécifications d'installation

In accordance with national standards for electrical explosion-proofing, the casing of explosion-proof lights must be grounded if equipped with a grounding device, ensuring reliable grounding.

En savoir plus

L’installation de lumières antidéflagrantes est-elle nécessaire

Does the Wiring of Explosion-Proof Lights Have to Be Steel Pipes

How Much Square Wire Is Used for Explosion-Proof Lights

What Wires Are Used for Explosion-Proof Lights

Does the Explosion-Proof Light Housing Need to Be Grounded