23 Year Industrial Explosion-Proof Manufacturer

+86-15957194752 aurorachen@shenhai-ex.com


Installation Method

Installation Method for Explosion-Proof Junction Box

Junction boxes might be a familiar sight, yet their specific functions often remain obscure to many. In essence, they are auxiliary devices used by electricians in home renovations, serving as a transitional point between wire joints and conduits. So, what distinguishes an explosion-proof junction box? Functionally identical to standard junction boxes, their application differs significantly – they are specifically used in environments prone to fires and explosions.
explosion proof junction box-11

Installation Guide:

1. Upon receiving an explosion-proof junction box, first inspect its exterior to ensure it is intact, undamaged, and all parts are present.

2. For installation, the junction box should be vertically affixed to a dedicated bracket or suspended at the designated location. Ensure the cables on both sides of the entry port are of adequate length to prevent any strain on the cable heads.

3. Remove the screws from the four corners of the box to open the cover, revealing four terminals inside. Simply secure the incoming cables to these terminals. After completing the connection, close the lid and reattach the screws securely.

This guide aims to provide a clear understanding of the importance and proper installation of explosion-proof junction boxes in safety-critical environments.



Leave a Reply

Get a Quote ?